GeoMax Zoom80 R, User Manual

Page: 37 / 54

Safety Directions Zoom80
| 37
Labelling
6.7 Electromagnetic Compatibility EMC
Description The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly
in an environment where electromagnetic radiation and electrostatic discharges are present, and without
causing electromagnetic disturbances to other equipment.

WARNING
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in force in this respect, GeoMax
cannot completely exclude the possibility that other equipment may be disturbed.

CAUTION
There is a risk that disturbances may be caused in other equipment if the product is used with accessories
from other manufacturers, for example field computers, personal computers, two-way radios, non-
standard cables or external batteries.
Precautions:
Use only the equipment and accessories recommended by GeoMax. When combined with the product, they
meet the strict requirements stipulated by the guidelines and standards. When using computers and two-
way radios, pay attention to the information about electromagnetic compatibility provided by the manu-
facturer.

CAUTION
Disturbances caused by electromagnetic radiation can result in erroneous measurements.
Although the product meets the strict regulations and standards which are in force in this respect, GeoMax
cannot completely exclude the possibility that the product may be disturbed by intense electromagnetic
radiation, for example, near radio transmitters, two-way radios or diesel generators.
Precautions:
Check the plausibility of results obtained under these conditions.
Laser Radiation
Do not stare into the beam
Class 2 Laser Product
according to IEC 60825-1
(2007 - 03)
Po  1.00 mW
 = 620 - 690 nm
a) Will be replaced by a class 3R warning label if applicable
a) Laser beam
b) Exit for laser beam
Type: Zoom80
Equip.No.: . . . . . .
Power: 12V/7,4V ---, 1A max
GeoMax AG
CH-9443 Widnau
Manufactured: . . . .
Made in . . . . . . .
Complies with FDA performance standards for laser
products except for deviations pursant to Laser Notice
No.50, dated June 24, 2007.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Art.No.: . . . . .
. . . . . .
S.No.: . . . . .
. . . . .
25
a
003336_002
b
Zoom80_016
a