GeoMax Zoom80 R, User Manual

Page: 2 / 54

Zoom80
| 2
Introduction
Introduction
Purchase Congratulations on the purchase of a Zoom80 series instrument.
This manual contains important safety directions as well as instructions for setting up the product and
operating it. Refer to "6 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
Product identification The type and serial number of your product are indicated on the type plate.
Enter the type and serial number in your manual and always refer to this information when you need to
contact your agency or GeoMax authorised service workshop.
Symbols The symbols used in this manual have the following meanings:
Trademarks • Windows is a registered trademark of Microsoft Corporation in the United States and other countries
• CompactFlash and CF are trademarks of SanDisk Corporation
• Bluetooth ® is a registered trademark of Bluetooth SIG, Inc.
All other trademarks are the property of their respective owners.
Validity of this manual
Available documenta-
tion
Refer to the following resources for all Zoom80 documentation/software:
•
the GeoMax Zoom80 DVD
• www.geomax-positioning.com
Type: _____________________________________
Serial No.: _____________________________________
Type Description

DANGER
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING
Indicates a potentially hazardous situation or an unintended use which, if not
avoided, could result in death or serious injury.

CAUTION
Indicates a potentially hazardous situation or an unintended use which, if not
avoided, may result in minor or moderate injury.
NOTICE Indicates a potentially hazardous situation or an unintended use which, if not
avoided, may result in appreciable material, financial and environmental
damage.

Important paragraphs which must be adhered to in practice as they enable the
product to be used in a technically correct and efficient manner.
Description
General This manual applies to all Zoom80 series instruments. Where there are differences
between the models they are clearly described.
Telescope • Measuring with IR mode: When measuring distances to a reflector with EDM
mode "IR", the telescope uses a wide visible red laser beam, which emerges
coaxially from the telescope's objective.
• Measuring with RL mode and LO mode: When measuring distances with EDM
modes "RL" and "LO", the telescope uses a narrow visible red laser beam, which
emerges coaxially from the telescope's objective.
Name Description/Format
Zoom80 Quick
Guide Provides an overview of the product together with technical data and
safety directions. Intended as a quick reference guide.
 
Zoom80 User
Manual All instructions required in order to operate the product to a basic level
are contained in the User Manual. Provides an overview of the product
together with technical data and safety directions. -

Zoom80 Technical
Reference Manual Overall comprehensive guide to the system and program functions.
Included are detailed descriptions of special software/hardware
settings and software/hardware functions intended for technical
specialists. -
