GeoMax Zoom80 R, User Manual

Page: 34 / 54

Zoom80
| 34
Safety Directions

CAUTION
From a safety perspective, class 3R laser products should be treated as potentially hazardous.
Precautions:
1) Prevent direct eye exposure to the beam.
2) Do not direct the beam at other people.

CAUTION
Potential hazards are not only related to direct beams but also to reflected beams aimed at reflecting
surfaces such as prisms, windows, mirrors, metallic surfaces, and so on.
Precautions:
1) Do not aim at areas that are essentially reflective, such as a mirror, or which could emit unwanted
reflections.
2) Do not look through or beside the optical sight at prisms or reflecting objects when the laser is switched
on, in laser pointer or distance measurement mode. Aiming at prisms is only permitted when looking
through the telescope.
Labelling
6.6.4 Aim360
General The Aim360 built into the product produces an invisible laser beam which emerges from the telescope
objective.
The laser product described in this section is classified as laser class 1 in accordance with:
•
IEC 60825-1 (2007-03): "Safety of laser products"
• EN 60825-1 (2007-10): "Safety of laser products"
Class 1 laser products are safe under reasonably foreseeable conditions of operation and are not harmful
to the eyes provided that the products are used and maintained in accordance with this User Manual.
Laser Aperture
Laser Radiation
Avoid direct eye exposure
Class 3R Laser Product
according to IEC 60825-1
(2007 - 03)
Po  5.00 mW
 = 650 - 690 nm
a) Laser beam
Zoom80_011
a
Type: Zoom80
Equip.No.: . . . . . .
Power: 12V/7,4V ---, 1A max
GeoMax AG
CH-9443 Widnau
Manufactured: . . . .
Made in . . . . . . .
Complies with FDA performance standards for laser
products except for deviations pursant to Laser Notice
No.50, dated June 24, 2007.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Art.No.:
. . . . .
. . . . . .
S.No.: . . . . .
. . . . .
25
003333_002
Description Value
Maximum average radiant power 10 mW
Pulse duration 11 ms
Pulse repetition frequency 37 Hz
Wavelength 785 nm