GeoMax Zone60 DG User Manual Download Page 46

Page: 46 / 66

ZRC60 Menu

007650_001

Remote control menu

screen

The ZRC60 remote control has its own menu where you can

change the following parameters:

•

Display brightness

•

Sleep mode hours

•

Remote shut-off time

☞

To access the remote control menu, press and hold

the Left and Right arrow buttons on the remote con-

trol for 1.5 seconds.

☞

For navigation within the remote control menu, use

the same buttons as for navigation within the

Zone60 DG menu. Refer to "6.1 Access and Naviga-

tion".

007651_001

Remote control display

brightness

You can change the display brightness on this screen.

Use the Up and Down arrow buttons to adjust the brightness as

desired.

007652_001

Sleep mode hours

You can determine how long the Zone60 DG stays in sleep mode

before turning off completely:

•

2 hours

•

4 hours

•

8 hours

•

16 hours

007653_001

Shut-off time

You can determine a shut-off time for the remote control:

•

30 seconds

•

60 seconds

•

120 seconds

If the remote control is not used during this time, it shuts off

automatically.

Overview

Display brightness

Sleep mode hours

Remote shut-off time

ZRC60 Menu

Summary of Contents for Zone60 DG


































































Search results

Summary of Contents for Zone60 DG

Reviews:

GeoMax Zone60 DG, User Manual, Page: 46 / 66

Search results

Summary of Contents for Zone60 DG

Reviews: