6.4
Menu Set 3
007633_001
Menu Set 3
In the Menu Set 3, you can select the following parameters:
•
Customer name entry
•
Display - percent/per mil
•
Display - thousandths/hundredths
•
Show grade settings on power up
•
Calibration alert - enable/disable
☞
To exit the menu, highlight and select the EXIT
icon. OR: Wait for 8 seconds and the menu is
exited automatically.
☞
To display the Menu Set 1, highlight and select the
MENU 1 icon.
The Customer name settings allow you to enter the name of the customer, to enable/disable the
customer name screen when turning on the Zone60 DG, and to protect the name entry with a
password.
Customer name entry
007634_001
Customer name entry
screen
When entering the Customer Name settings the first time, you
are taken directly to the Customer Name entry screen. On this
screen, you can enter 6 lines of text with up to 20 characters per
line.
It is recommended to determine the desired text before changing or entering the information:
To save the entered information, press and hold the Grade button for 1.5 seconds.
Enable/disable the display name on start-up
After saving the name entry, the display name on start-up screen is displayed. You can choose
between two options:
•
Display (YES): The customer name screen is displayed each time the laser is turned on.
•
Save only (NO): The information entered in the customer name screen is stored in the
laser, but is only visible when the customer name entry screen is accessed.
Overview
Customer name settings
Zone60 DG Menu
41