WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by GeoMax for compliance could void the
user's authority to operate the equipment.
Serial Number: YWWY60DG
Y W W Y 8 7 0 2 5 0 0
Class 1 Laser - IEC 60825-1:2014
Model: Zone60 DG
Power: 8.4V / 0.5A / Art.No.: 835240
Made in China / Manufactured: MM/YYYY
Contains FCC ID: RFD-CT301 IC: 3177A-CT301
Complies with 21 CFR 1040.10 and
1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No.
56, dated May 8, 2019.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) This
device must accept any interference
received, including interference that
may cause undesired operation.
GeoMax AG
CH-9443 Widnau
011206_002
Labelling Zone60 DG
Safety Directions
13