GeoMax EZDig T, User Manual

Page: 16 / 36

Same as when digging a
horizontal reference, the
screen and the LED display
will indicate the actual
difference of your bucket tip
to the reference.
Digging a trench with 2% slope
Method 1: Using the ground as reference
Short-press the Slope Symbol
Dial-in 2.00% and confirm
with the checkmark
Place the tip of the bucket on
your final elevation (ground)
then Short-press one the
elevation symbol
Dial-in “0” and confirm with
the checkmark
Note: Without 2D
sensor, you have to dig
straight, not leaving
the slope’s axis by
rotating the cab. A slew
of the cab out of the
axis will instantly lead
to a loss of accuracy!
16