27
3.11 L
Display all 6 log intervals.
*L
Log Intervals List
------------------------------------------------
Interval #1 Length: 30 Iterations: 100
Interval #2 Length: 40 Iterations: 90
Interval #3 Length: 50 Iterations: 80
Interval #4 Length: 60 Iterations: 70
Interval #5 Length: 90 Iterations: 60
Interval #6 Length: 120 Iterations: 0
*
This command has no effect on the current interval (scan or log). If logging is started and log
intervals are enabled the iterations value will be followed by the number of readings left at that
interval. For example:
*L
Log Intervals List
------------------------------------------------
Interval #1 Length: 30 Iterations: 100/96
Interval #2 Length: 40 Iterations: 90/90
Interval #3 Length: 50 Iterations: 80/80
Interval #4 Length: 60 Iterations: 70/70
Interval #5 Length: 90 Iterations: 60/60
Interval #6 Length: 120 Iterations: 0/0
*
The above list indicates that there are 96 iterations of interval one left before interval two begins
execution. See the
Ln/lllll/iii
command section to modify intervals.
Summary of Contents for LC-2x16
Page 2: ......
