Trio II Touchscreen
.
User manual
history screens
14
15
System Status
This screen can be accessed via
the
Menu
.
Use the
u v
buttons to select any of
the icons and then
w
to view more
information on the different parts
of the smart metering system.
The icons show the following:
g
Status of the electricity meter
(where fitted)
h
Status of the gas meter
(where fitted)
l
Signal status between the
monitor and the smart meters
- this is also shown in the top
left of the screen
a
This monitor (always green)
If the optional WiFi module has
been fitted, then the following will
also be shown:
m
Signal status to the local
WiFi network - this is also
shown in the top left of
the screen
p
Connection status to the
cloud service
history screens
Electricity History
By selecting
Electricty usage
from
the
Menu
screen, you can see your
recent usage.
Day tab
The screen initially shows the current
usage for today in energy (
kWh
),
divided in to the 24 hours of the day.
Each bar represents a one hour
period and is shown in green. The
lightest green bar shows the highest
hourly period for today and the
darkest green bar shows the current
hour or incomplete period.
The highest hourly period (lighter
green) will always display the usage
for that hour, the figure is shown to
the right of the bar (0.86kWh in the
example shown above).
Your monitor learns your normal
usage each day of the week, and
this is shown by a dot for each hour.
Pressing the
w
button will change
the values from being shown in cost
as £/hr and energy as kWh.
The total for today is shown inclusive
of any daily standing charge. This
means at midnight the total may
be greater than £0.00, even if no
electricity has been used. The bars
exclude any daily standing charge.