Trio II Touchscreen
.
User manual
home screen
8
9
home screen
Overview
The
Home
screen is broken down
into two or three tabs, depending
on whether you have electricity or
gas in credit or pre-payment mode.
When your
Trio II
is powered on, it
will automatically show the
Home
screen once connected to the
smart meter(s).
You can also, at any time, press the
t
button return to the
Home
screen.
Your meter and WiFi (where
applicable) signal status is shown in
the top left of the screen.
Use the
u v
buttons to switch
between the
Energy now
,
Energy
today
or
Prepay balance
(when in
prepay mode) tabs.
When you next return to the
Home
screen from other screens,
the previously selected tab will
automatically be shown.
getting started
Meter connection
The screen will show
Connecting to
smart meter...
for up to 5 minutes
while the monitor connects to the
smart meter(s) in your home.
Should the screen show
No
Network
then you will need to
contact your energy provider to
complete the installation.
If the screen shows
Lost Network
,
then you may need to move the
monitor closer to your smart meter(s)
to re-establish the connection.
You can check the strength of
the signal to the smart meter(s) by
looking at the
l
and
m
icons in
the top left hand corner of
the screen.
Connection Established
Once your monitor has successfully
established a connection to your
smart meter(s), your
Trio II
will
show the current consumption for
electricity and recent gas usage.
If your monitor loses connection
to the smart meter(s), then it will
show the alert below. Try moving
the
Trio II
closer to the smart
meter(s) to re-connect.