background image

Specifications:

Model

GW-107L (EIA)

GW-107L (CCIR)

Pick-up element

1/3" Interline transfer CCD image sensor

Number of total pixels

537(H) × 505(V)

537(H) × 597(V)

Number of effective pixels

510(H) × 492(V)

500(H) × 582(V)

Unit cell size

9.6μm(H) × 7.5μm(V)

9.8μm(H) × 6.3μm(V)

Sync system

Internal

Scanning system

2:1 Interlace

Video output

1Vp-p 75Ω(Unbalanced)

Resolution

420TV Lines

Minimum illumination

0.005 Lux F1.4

S/N ratio

46dB (AGC off)

Shutter

ON(EI)

1/60 ~ 1/100000sec.

1/50 ~ 1/100000sec.

OFF

1/60sec.

1/50sec.

AGC

AGC 5~32dB

Gamma characteristic

γ≒0.45

Power supply

AC24V ±10%

Power

1.3W

Storage temperature

-30°C~+70°C

Operating temperature

-10゜C~+40゜C

Weight

Approx. 130g

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,and
(2)this device must accept any interference received,including interference that may cause undesired

operation.

Important:
The camera mentioned above does not comply with this regulation,if it is modified at your disposal.

Design and specifications are subject to change without notice.

GENWAC is not responsible for any inconvenience or the tendent damages to the video or audio and monitoring
recording equipment, caused by misuse, misoperation or improper wiring of our equipment.
If for any reason the GW-107L does not work properly, or if you have any questions regarding installation or
operation, please contact the distributor or dealer from which it was purchased.

GENWAC INC.

Suite 6. Prel Plaza. Orangeburg New York 10962. U.S.A
Phone ; 914-359-1490

Fax ; 914-359-1391

JAPAN

Manufacture:

Watec Co.,Ltd.

Summary of Contents for GW-107L

Page 1: ...does not mean that the GW 107L is damaged 7 When installing the GW 107L in an industrial or commercial environment i e within equipment housing near other electronic device etc make sure to avoid any strong electromagnetic field otherwise the video output may be distorted and monitor sharpness compromised 8 Check and protect the GW 107L from any source generating a strong electromagnetic field fro...

Page 2: ...onnections are made to the GW 107L the power is switched OFF 1 Remove the Lens Cap from the CCD front face and attach the lens Note When the C mount type lens is used mount the optional 34CMA R C mount conversion ring before the lens is mounted Confirm the specifications of the lens to be used when it can not be mounted onto the GW 107L smoothly Mounting a nonstandardized lens may cause damage to ...

Page 3: ... required auto iris lens has the adjustment control as shown in the drawing on the left Set the ALC Automatic Level Control adjustment control in the center between AV and PK on the lens using a small screw driver Point the lens towards the object while looking at the screen Turn the LEVEL adjustment control clockwise or anti clockwise to obtain the optimal brightness of the object on the monitor ...

Page 4: ...ration is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Important The camera mentioned above does not comply with this regulation if it is modified at your disposal Design and specifications are subject to change without notice GENWAC is not r...

Reviews: