14
Remember to switch off the power by removing the device
plug in ECO 275 or at the socket before opening the unit or
changing the filter. Note – it may be difficult to reach the
device plug on the unit when the ducts are installed and
insulated.
Filters
When the filter timer reaches the set value for a filter
change, this will appear in the text in the Optima Touch
display or in the Genvex app, or be indicated by a yellow
flashing light in Optima Basic. This means that the filters
must be replaced/cleaned.
Stop the system by removing the device plug in ECO 275 or
at the socket. Open the filter plugs and remove the filters.
Once the filters have been cleaned/replaced, insert the
clean filters and click the filter plugs onto the cabinet
again. Reconnect the 230V power.
The filter alarm can now be reset via the display or the app.
The system then returns to normal operation.
If you want to replace the filters using a different time
interval, this can be adjusted in the user menu.
Do not vacuum or clean at high air pressure.
This will damage the filter!
SYSTEM MAINTENANCE
