Brakes
o Ensure front and rear brakes function properly with sufficient lever pressure.
o Ensure brake pads are not over worn and are correctly positioned in relation to the calipers.
o Ensure
brake cables show
no obvious signs of
fraying
or
damage
.
o Ensure brake control levers are adjusted, lubricated and tightly secured to the handlebars.
Wheels and Tires
o Ensure tires are inflated to within the recommended limits displayed on the tire sidewalls.
o Ensure ties have tread and have no BULGES OR EXCESSIVE WEAR.
o Ensure all wheel spokes are tight, rims run true and have no obvious wobbles or kinks.
Steering
o Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.
o Ensure the handlebar is set correctly in relation to the forks and the direction of travel.
Chain
o Ensure the chain is lubricated, clean and runs smoothly.
o Extra care and frequent cleaning is required in wet or dusty conditions.
Cranks and Pedals
o Ensure pedals are secured tightly to the cranks.
o Ensure the cranks are securely tightened and are not bent.
Derailleurs
o Check that the derailleur is adjusted and functioning properly.
o Ensure shift and brake levers are attached to the handlebar securely.
o Ensure all brake and shift cables are properly lubricated.
NOTICE:
Before
every
ride
,
it
is
important
to
carry
out
the
following
safety
checks.
Safety Checklist
Safety Check
Basic Steps
WARNING
Failure to perform
equipment
safety checks increases the chance of
vehicle failure which can
result in
serious injury or death
.
Be sure you
check your equipment before each ride.
1
6
