GENUINE MOTORCYCLES G400C, Owner'S Manual, Page: 22 / 74

20
IV
.
CONTROLS
Ignition Switch
The ignition switch is used to start the engine and turn the
engine off.
Caution
·Do not change the ignition key position when riding.
If the key is moved to the position during riding, all
electrical systems will be off. While riding, do not remove the
main switch key in order to avoid an accident. If necessary,
stop the motorcycle prior to removing the key.
- Before removing the key, make sure the handle bar is
locked.
- If the engine is not started after turning the key to the
position, the battery will discharge over time.
- Do not use sharp metal keys or key fobs to avoid scratching
the upper triple clamp. Use a cloth or leather key fob.
There are two keys supplied with your motorcycle.
Either key operates the ignition switch, fuel tank
and steering lock. One key should be removed and
saved as a spare.
Position Function
For starting and driving the
vehicle (turning on
all the main circuits.)
To stop the vehicle,
switch off all circuits.
To lock the handle bar.