GentleTent GT HOME 410 Disassembly Manual Download Page 3

Page: 3 / 3

Using your body weight squeeze out

remaining air again.

www.gentletent.com

www.facebook.com/gentletent

GentleTent Ltd. / B Turtle Ltd.

Murlingengasse 44 / 1A

1120 Vienna, Austria

Tel.: +43 (0) 664 394 10 78

Now roll or fold up the awning lengthways.

NOTE:

The valves should now be in the last fold on the bottom.

Now unfurl the packsack on

the ground, tuck in the awning

and close the Velcro fasteners.

Fold up the awning further, starting from the side without valves, until it becomes one long strip. Applying pressure to the tent with

your body weight, any remaining air will be squeezed out.

NOTE:

The folded-in sections should have (exactly!) the size of the packsack!

DONE!

Page 3 of 3

Valves

Summary of Contents for GT HOME 410

Page 1: ...dows and ventilation openings on the in and outside 6 Finally open both valves of the awning s main tubes at one broadside on the in outside and let the tent collapse TIP If you have the time leave t...

Page 2: ...e same length 10 10 10 11 11 7 1 Flip the entire awning and put it on the roof 2 Be mindful that the ground straps lie on top 3 Make sure that the awning s front is placed securely under the ground st...

Page 3: ...TE The valves should now be in the last fold on the bottom 15 Now unfurl the packsack on the ground tuck in the awning and close the Velcro fasteners 13 13 14 15 12 12 12 12 Fold up the awning further...