Fold up
9
After you’ve emptied the main tube,
adjust the awning carefully.
11
Now fold up the side part with the valves in the middle again, so the valves rest on
the outer edge. This way, any remaining air can still the escape the air tubes while you
continue to fold up the tent.
10
Now fold in the left and the right side part. Fold along the seam.
NOTE:
Only the side parts are folded in. Depending on the tent, they might not meet in the middle or have the same length!
10
10
10
11
11
7
1. Flip the entire awning and put it on the roof.
2. Be mindful that the ground straps lie on top.
3. Make sure that the awning’s front is placed securely under the ground straps.
8
Squeeze out air starting on the oppo-
site side of the valves and going towards
the same. If you’re on your own, squeeze
out the air on one side first and then on
the other side of the air tube. Repeat the
process
at least 2x!
7
8
9
7
Page 2 of 3
Valves
Tip:
Inflating works best when working
in twos! Start together at the opposite
side of valves – each person following
one side – and work towards the val-
ves squeezing out air as you go.
Valves
Valves
