24
A
EN
Rev. 00_06_2016
MAN_C330_B001
STANdARd MAINTENANCE TABLE
FREQUENCY
INTERVENTION AREA
INTERVENTION TYPE
ONCE A dAY
Safety devices.
Ensure they are intact, correctly installed and functioning.
Electrical cable and plug.
Visual check of usage status.
Tank.
upon termination of each work cycle, rest the appliance on
the ground and drain the tank condensate pump opening the
condensate pump
(B)
.
EVERY WEEK
Wheels.
Wheel pressure check. Subsequently pump up with compressed
air up to a maximum of 2.5 bar.
N. 2 air filters.
unscrew the screws
(1)
.
remove the cover
(2)
.
Extract the filter
(3)
and clean it using compressed air.
Correctly replace the cover.
nOTe: RePlACe in The insTAnCe WheRe iT is WORn.
EMERGENCY STOP
Appliance emergency stop can be carried out by turning the “ON-OFF”
switch
(A)
to the “OFF (0)” position.
In order to avoid any possible danger, authorised operators must carry
out the following operations.
1) IMMEdIATELY BRING THE “ON-OFF” SWITCH TO THE “OFF (0)”
POSITION (A).
2) IMMEdIATELY NOTIFY THE “SAFETY MANAGER” (WHERE THE
APPLIANCE IS USEd IN A BUSINESS CONTExT) OF THE EMER-
GENCY.
START-UP SUBSEQUENT TO AN EMERGENCY STOP
After having resolved the issues which offset the emergency, and checked that no damage and/or anomalies have been
caused to the appliance, with the consent of the safety manager (where the appliance is used in a business context) start
the appliance as described in Paragraph “APPlIANCE ACTIVATION”.
STANdARd MAINTENANCE
All activities carried out to ensure use and operation of the appliance, via various intervention types (regulation, valve
checks, cleaning of air filters, etc.) executed by the authorised maintenance person according to pre-established time
intervals.
AUThORiseD OPeRATORs MUsT OnlY CARRY OUT OPeRATiOns FOR WhiCh TheY ARe QUAliFieD AnD
WiTh The COnsenT OF The sAFeTY MAnAgeR (WheRe The APPliAnCe is UseD in A BUsiness COnTeXT).
iT is FORBiDDen FOR AUThORiseD OPeRATORs TO leAVe The APPliAnCe UnsUPeRViseD DURing OPeRATiOn
AnD MAinTenAnCe inTeRVenTiOns.
