background image

11

EN

MAN_C330_B001

Rev. 00_06_2016

WARRANTY

1)  WARRANTY dECLARATION: 

the Manufacturer guarantees the Acquirer, the replacement, repair and intervention 

relative to all appliances, where the aforementioned display conformity defects which comprise correct usage and 

operation, only where such defects are owing to the fault of the Manufacturer. The Manufacturer reserves the right 

to adopt the best solution in order to restore appliance conformity within a reasonable amount of time.

2) ACQUIRER: 

the Acquirer is defined as a “consumer” where the purchase was made by a physical person and where 

the appliance is not to be used for commercial or professional purposes. The Acquirer is defined as a “professional or 

company” where the purchase was made by a professional or company who aims to use the appliance for commercial 

or professional purposes.

3) TERMS: 

the Manufacturer is responsible where the defect of conformity is discovered within the following time frame 

from the purchase date:

 

24 months 

where the purchase was made by a “consumer” as described under point 2).

 

12 months 

where the purchase was made by a “professional or company” as described under point 2).

 

36 months:

 see terms of extension of the manufacturer’s warranty in the dossier accompanying.

4) VALIdITY: 

the warranty is valid if the buyer notifies the manufacturer of any lack of conformity within 2 months from 

the date on which the lack was detected. The above mentioned notification must necessarily be accompanied by a 

regular proof of purchase (till receipt or invoice).

5) ExPIRY: 

the warranty expires in the instance where the Acquirer uses the appliance in an inappropriate and/or in such 

a way that goes against the details in the “Instruction Manual” supplied by the Manufacturer, or in the instance where 

the defect is owing to the inexperience of the Acquirer or an accident.

6) RESPONSIBILITY: 

the Manufacturer is exempt from all responsibility from harm caused to the Acquirer in terms of 

lack of or reduced performance owing to conformity defects.

7) FEES: 

the fees relative to the work force and materials necessary to restore the appliance are charged to the Manu-

facturer. The fees and delivery methods are to be agreed upon with the Authorised Supplier.

RIGHTS RESERVEd

• 

rights reserved with regards the “Instruction Manual” remain with the Manufacturer. 

• 

No parts of the present manual, in full or in part, may be copied and/or passed on in any way, without written autho-

risation from the Manufacturer. 

• 

All the brands mentioned belong to the respective owners.

INTENdEd USE

FIELd OF OPERATION

Industrial, handicraft and civil.

PLACE OF OPERATION

Interior locations with sufficient lighting, ventilation, with temperature and air humidity values as per details provided in 

Paragraph “TEChNICAl SPECIFICATIONS”, in compliance with legislation governing health and safety in the work place 

in force in the country of usage. The appliance must rest on a surface that ensures the appliance is stable with respect to 

its weight and overall dimensions (see Paragraph “TEChNICAl SPECIFICATIONS”).

WARning! 
The APPliAnCe MUsT Be KePT OUT OF ReACh OF ChilDRen.

Summary of Contents for C 330/04

























































Reviews: