MPAII Installation and Operations Manual Page 1
Technical or Setup Assistance
Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Congratulations on purchasing the MPAII Mixer/Power Amplifier II. This eight-
channel, PC-controlled, automatic microphone mixer and power amplifier is a
proven solution for distance learning, panel discussions, audioconferencing and
videoconferencing applications, broadcast studios, courtrooms, hotels and
government meetings.
The MPAII contains commonly requested features such as an RS232 connection
for PC control, logic output and user-programmable gated microphone operation.
The latter allows you select which microphones and how many you wish to gate
or not to gate; this reduces noise and increases intelligibility. The MPAII also
comes equipped with several factory-designed programs and user-changeable
programs to compliment any environmental need.
This manual explains how to install, set up and operate your MPAII. It also
provides instructions on how to improve room acoustics and resolve minor
technical problems, should any arise.
If you need information on how to install, set up or operate your system, please
contact Gentner Communications Corporation at the location noted below. We
welcome and encourage your comments so we can continue to improve our
products and serve your teleconferencing needs.
Gentner Communications Corporation
1825 Research Way
Salt Lake City, Utah 84119
TEL: Worldwide (801) 975-7200 In U.S.A. (800) 945-7730
FAX: Worldwide (801) 977-0087 In U.S.A. (800) 933-5107
FAX-On-Demand 24-Hour Information line (800) 695-8110
Worldwide Web Page @ http:\\www.gentner.com
Please register your MPAII by completing the self-addressed, postage prepaid
warranty registration card and return it to Gentner Communications by mail. You
may also FAX it to the above listed fax number or call Gentner Communications.
When your product is properly registered, Gentner Communications will be able
to serve you better should you require technical assistance or desire to receive
upgrades, new product information, etc.
Ensure that the following equipment (See Figure 1, below.) was received with
your shipment:
SHIPPING NOTE:
Gentner Communications is not responsible for product damage incurred during
shipment. You must make claims directly with the carrier. Inspect your shipment
carefully for obvious signs of damage. If the shipment appears damaged, retain
the original boxes and packing material for inspection by the carrier. Contact
your carrier immediately.
Introduction
Warranty
Registration
Unpacking
Figure 1. Equipment diagram
