manualshive.com logo in svg

Genther MPAII, Installation And Operation Manual

Share
Download
Genther MPAII Installation And Operation Manual Download Page 23

MPAII Installation and Operations Manual    Page  19

Technical or Setup Assistance

Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com

Config Name
The name of the current configuration file.  A configuration file contains the
file names of six program files.

MPAII Location
Location in the MPAII where the program will be stored.

Program Name
The name of the current program file.  A program file contains the
parameters for one program.

Parameter Values
The current program’s parameter values.

Function Keys
Keys strokes that allow you to perform various functions such as load and
save files to and from the disk, and send and receive programs to and from
the MPAII.  See Programming Functions (below) for more information.

Current Drive and Directory
The current drive and directory where files are loaded and saved.

Prompt Line
Listing of shows valid keyboard actions.

Program Parameters
Program parameter labels.

Programming Functions

All function keys are supported by the MPAII programming software.  Below
are descriptions of the function-key actions:

Online Help <F1>
Press <F1> to bring up an online-help screen on the highlighted parameter.
The online-help screen gives a brief description of the highlighted parameter,
what it does, the range of values and recommended settings.  After you are
finished reading the help screen, press any key to return to the main menu.

Select Program <F2>
Press <F2> to bring up the program-selection screen.  This allows you to
select which program will be active on the MPAII.  To choose one of the 12
configuration programs, use the up and down keys to select a program and
press <ENTER>.  Press <F10> to return to the main menu.

SELECT PROGRAM NOTE:
This function does not send the parameter values of the selected program to the
MPAII.  If you have changed the parameter values on the main screen, you must
first send the modified programs to the MPAII using <F7>.

Save Configuration <F3>
To save the configuration to disk, type a name in the configuration name
field.  Next, type the names of programs in the program name field for the
six programs.  The file names must be eight characters or less and contain
only letters and numbers.  After you have named the configuration file and
the six program files, press <F3>.  To save an individual program, refer to

Summary of Contents for MPAII

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands