5
USER INSTRUCTIONS
PF3000P
USER INSTRUCTIONS
Please read these instructions and then store them in a safe place for future
reference.
The respirator must be fitted and used in accordance with these instructions to obtain
the approved level of performance.
CAUTIONS
•
For adequate protection this respirator must fit or be adjusted to the size of the
user’s head.
•
The respirator is made to absorb the energy of a blow by partial destruction or
damage to the shell and the harness, and even though such damage may not be
readily apparent, any respirator subjected to severe impact should be replaced.
•
The attention of users is also drawn to the danger of modifying or removing any
of the original component parts of the respirator, other than as recommended
by the respirator manufacturer.
•
Respirators should not be adapted for the purpose of fitting attachments in any
way not recommended by the respirator manufacturer.
•
Do not apply paint, solvents, adhesives or self-adhesive labels, except in
accordance with instructions from the respirator manufacturer.
WARNINGS
•
REPAIR IS BY REPLACEMENT OF DEFECTIVE PARTS ONLY.
•
ONLY APPROVED PureFlo® PARTS SHOULD BE USED.
•
ALTERATIONS AND AFTER-MARKET MODIFICATIONS TO HEADWEAR PRODUCTS
MIGHT COMPROMISE THE PROTECTIVE FEATURES OF THE HEADWEAR.
•
RESPIRATORS MUST BE STORED IN ACCORDANCE WITH THESE INSTRUCTIONS
(INCLUDING DURING BREAK TIMES etc.).
•
RESPIRATORS MUST BE REGULARLY CLEANED IN ACCORDANCE WITH THESE
INSTRUCTIONS.
•
RESPIRATORS MUST BE DECONTAMINATED IN ACCORDANCE WITH THESE
INSTRUCTIONS.
•
THE HEADBAND, CONCUSSION STRAP, FIXINGS AND MOUNTING POINTS FORM
PART OF THE STRUCTURE OF THE RESPIRATOR. ENSURE THAT THE NEW
ASSEMBLY IS FITTED CORRECTLY, OR THE INTEGRITY OF THE RESPIRATOR MAY
BE COMPROMISED.
•
PRIOR TO USE A FLOW CHECK MUST BE PERFORMED.
