9
APPROVAL FOR USE
PF3000P
APPROVAL FOR USE
This product has been shown to meet the requirements of Annex V of the Personal
Protective Equipment Regulation (EU) 2016/425 and is manufactured in accordance
with Annex VIII Module D, and thus is CE marked.
Annex V and VIII assessments conducted by BSI Netherlands.
(Notified Body Number: 2797)
Product assessed against the requirements of the following standards:
Respiratory Protection
EN12941:1998+A2:2008
AS/NZ 1716: 2012
Table 2
Declaration of Conformity available at:
https://shop.gentexcorp.com/content/DoC-PF3000P.pdf
Special conditions for safe use
1.
Only battery Part No PF3000-03-003 should be fitted to the respirators.
2.
The battery should only be recharged in a safe area.
3.
PureFlo® 3000 respirators are only tested to be used within the limited ambient
temperature range (+5°C to +40°C).
4.
The unit should not be worn in the power off state. No respiratory protection is
to be expected and can result in rapid build-up of carbon dioxide and depletion
of oxygen within the hood.
5.
Marking on filters used on this device are in accordance with EN 12941 and do
not relate to any other standards.
