2-3.7. Installing Coiled Communications Cord
NOTE:
See
Figure 2-32
for a comparison of the standard communications cord and the coiled
communications cord.
To install the coiled communications cord (87B7491-2), you must first remove the standard
communications cord. This requires you to disassemble and remove several components from
the helmet.
Once you have disassembled these components, you can connect the coiled cord and then
reassemble and reinstall the components. You will refer to Paragraph 3-3.7 (Page 57) as
follows:
1. Remove the standard communications cord from the helmet by following the
Removal
procedure in Paragraph 3-3.7.
2. Install the coiled communications cord into the helmet by following the
Installation
procedure in Paragraph 3-3.7 .
20
Figure 2- 32. Standard and Coiled Communications Cords
Standard communications cord
Coiled communications cord
Summary of Contents for HGU-56/P
