Gentex HGU-56/P, Operation And Maintenance Instructions

Page: 13 / 86

2-3. INSTALLING OPTIONAL COMPONENTS
Install optional components on the helmet as needed. Installation procedures are as follows:
• Installing SCL: Paragraph 2-3.1 (Page 8)
•
Installing Optional Dual Visor Assemblies (Quick-Disconnect and Direct-Mount):
Paragraph 2-3.2 (Page 9)
• Installing ANVIS Attachment Kit (for Quick-Disconnect ANVIS Dual Visor Assembly):
Paragraph 2-3.3 (Page 6)
• Installing ANVIS Attachment Kit (for Direct-Mount ANVIS Dual Visor Assembly):
Paragraph 2-3.4 (Page 12)
•
Installing High-Contrast Visor: Paragraph 2-3.5 (Page 16)
• Installing Flex Boom Microphone: Paragraph 2-3.6 (Page 18)
• Installing 36" Coiled Communications Cord: Paragraph 2-3.7 (Page 20)
•
Installing Maxillofacial Shield: Paragraph 2-3.8 (Page 21)
7
When you replace components or install additional components on Gentex products,
always use genuine factory-new Gentex parts. This will ensure a correct fit and
maintain the safety of the product. Use of non-Gentex parts (salvage, refurbished,
etc.) for replacement or additional installation will void any product warranty and may
compromise the safety of the user.