Gentec S-LINK, User Manual

Page: 9 / 60

S-
LINK User’s Manual Revision 2.8
4
User input correction factors 1 multiplier and 1 offset (7 digits floating point)
Positive External trigger 3 to 24 V @ 13 mA, optically isolated.
External trigger pulse width 2 us minimum, no maximum time.
Internet Upgrades Yes (USB only)
PC Serial Commands Yes
Dimensions
(connectors included)
147 (L) x 106 (W) x 34 (H) mm
Weight 0.424 kg
Power Over USB Yes
External Power Supply for S-
Link
–Ethernet and S-Link –
RS232
Input: 100/240 VAC 50-60 Hz, Output 9 VDC 1.66 A
S-LINK-2
2 Channels
1.3 Connector Descriptions
Fig. 1-2 S-Link-Ethernet Connectors
.
1- ETHERNET INTERFACE CONNECTOR (optional on S-Link):
This interface allows remote control and data transfers between the S-Link and a computer via
an Ethernet network, a wireless router or a direct connection.
2- External trigger:
The Input connector is a Female BNC. The External trigger is TTL compatible. The monitor
detects a trigger on the rising side of the external trigger signal. To measure accurately, the
trigger must be just before the laser pulse, or just after. For Example
A QE12SP-S-MT has a 20uS rise time
The External trigger must be 4 us before or 19us after the laser pulse.