Gentec S-LINK, User Manual

Page: 18 / 60

S-
LINK User’s Manual Revision 2.8
13
1.5.8 The graphic mode option after a load file
In the Status Menu, Select a file name for the file to save or to view.
To adjust the graphic axis, double click on the left side of the Y axis. Deselect the Auto mode to enter the
axis values. You can also use the mouse wheel to zoom in or out. You can zoom the X axis using the
mouse wheel while holding the Shift key. Left click on the graphic to change the line Y position. If you
are zooming the X axis, you can Left click on the graphic and move the center X position. Double click in
the graphic window to get the numerical values in the graphic.
To zoom the Y axis
+
To zoom the X axis in the Load File option