Restoring Factory Defaults
At any time your keypad can be returned to factory defaults. In order to wipe out
the user configuration, press and hold two key switches down while plugging
the keypad power in. Continue to hold them down until the keypad is
completely plugged in and then release the two keys. Note: If you have
double-width key caps, only hold one down.
Default684.ckd key table:
0xA1
0xA2
0xB1
0xB2
0xC1
0xC2
0xD1
0xD2
0xE1
0xE2
0xF1
0xF2
The Bump Bar version has 24 key switches under 12 double-wide key caps.
Only one of each pair of keys is programmed by default. You can choose the
codes you want on whatever keys you want. You may also move the key caps
around (E.g. make them vertical instead of horizontal).
Un-Installing and Re-Installing
It’s a quick and simple matter to remove, re-install or upgrade MacroMaster. To
un-install MacroMaster, click on:
Start >> Programs >> Genovation >> MacroMaster684 >> Uninstall MacroMaster684
The un-installer will NOT remove any macro files you have created. If you are not
installing a newer version, you may delete the macro files and directories
manually.
If you are installing a newer version (upgrading), your macro files will be saved
automatically for you.
