Genmitsu 3018-MX3, User Manual

Page: 30 / 53

Part 2: Mechanical installation
26
Step 17: Install Spindle
NO. NAME CODE QTY. BEFORE
Prepare
materials
1 Spindle MX3-14 1
MX3-14
M4 Bolt
Tighten
the screws
Tools
1 Allen wrench (3mm) AFTER
Operation
Steps
1
Loosen the M4 bolt in the X-Z Axis assembly, Vertical
place the spindle to the ring of the X-Z Axis assembly.
2
When the gray cover of the spindle complete fall into the
ring, tighten the M4 Bolt. Be careful not to use excessive
force to avoid plastic damage.
Check
1
Check all the parts carefully, find where need to adjust,
then you can tighten all the bolts (remember we remain
20% space before)
Remind