Genmitsu 3018-MX3, User Manual

Page: 21 / 53

Part 2: Mechanical installation
17
Step 8: Running part (Y Axis) Installation
NO. NAME CODE QTY. BEFORE
Prepare
materials
1 Stepper motor Assembly (from Step1) 1
MX3-13
MX3-52 x4Pcs
2 M3 Bolt M3*14mm
MX3-52
4
3 Base (from Step6) 1
4 Lead Screw assembly (from Step7) 1
Tools
1 Allen wrench (2.5mm, 2mm) AFTER
Operation
Steps
1
Put the Lead Screw assembly into The Base, insert the end of the
Lead screw to the hole of Phenolic resin plate-B, and put another
end of the screw insert into the bearing by force, which located in
the middle of the Phenolic resin plate-F.
Phenolic
resin plate-B
Phenolic
resin plate-F
2
At the same time, make the stepper motor assembly install on the
Phenolic resin plate-B, insert the lead screw to the coupling of the
motor assembly. Tighten the M3 Bolts of the motor, don't forget the
small screw in the coupling.
Check 1
When you finish the steps here, you should check the Horizontal
and Vertical direction, if you have no professional tools, you can
observe the bearing mount fall down smooth or not, if not, then
you have to check the vertical direction of the Guide Rail.
Remind 1
Finish check and fix the base, you can tighten all the bolts
(remember that we remain 20% space before)