Genius Scanner
11
Testing the Scanner
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning program. Before testing your scanner, check to
make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner's document cover and place a picture onto the scanner
glass headfirst and face-down.
2. Gently close the document cover.
3. Next, open the scanner's image-editing program. Click on the Windows
START button and then PROGRAMS, PRESTO! IMAGEFOLIO, and then
PRESTO! IMAGEFOLIO.
4. When Presto! ImageFolio opens, click on FILE and then SELECT SOURCE.
In the window that opens, choose the model name of the scanner you have
installed. Click on the SELECT button to close the window. This procedure
allows Presto! ImageFolio to gain access to the scanner.
5. Within Presto! ImageFolio, click on FILE, ACQUIRE and then choose
ACQUIRE.
6. The Genius TWAIN window will open.
7. If an image appears on your screen, your scanner is working properly. If the
image doesn’t appear to your liking, you might need to adjust some settings
in the Genius TWAIN window. To learn how to adjust scanner settings,
please refer to the Genius Help by clicking the Help button in the Genius
TWAIN window.
Scan and Image Editing
Genius scanner provides two different ways for scanning:
F
F
r
r
o
o
m
m
“
“
S
S
C
C
A
A
N
N
”
”
H
H
o
o
t
t
k
k
e
e
y
y
-
-
-
-
1. Open the document cover. Place a picture headfirst and face down onto the
scanner glass and close the document cover.
2. Press the “
Scan
” hot key button on the scanner.
3. After
the
Presto! PageManager
software is launched, the
Genius TWAIN
window will appear and start to prescan automatically.
4. Select the appropriate scan mode and resolution, if desired. To proceed the
scanning task, click the
SCAN
button from
Genius TWAIN
window.
