Getting started
Before using the Camcorder
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
(Fig.5)
(Fig.6)
Thank you for selecting digital camcorder of high quality and resolution as manufactured by our
company.
Press the power switch to turn on or off the camcorder. Some basic settings must be performed
prior to use of this camcorder.
Setting the format of date and time
1) Rotate the Mode knob to switch to the Setup mode.
2) Move the Up and Down button to select the options of time format or date format and enter the
submenu;
3) Move the Up and Down button to select the type of the time format or date format.
Setting the date and time
1) Rotate the Mode knob to switch to the Setup mode
2) Move the Up and Down button to the option of date and time setting and enter the submenu;
3) Move the Up and Down button to select whether setting the time and date; if selecting “Yes”,
enter the submenu;
4) Move the Up and Down button to select changing the option; Move the Left and Right button
to adjust the value of the option.
Setting the buzzer
1) Rotate the Mode knob to switch to the Setup mode
2) Move the Up and Down button to the option of prompt tone and enter the submenu;
3) Move the Up and Down button to make the corresponding setting;
4) Return to the menu of the Setup mode after completing the setting.
Setting the language
1) Rotate the Mode knob to switch to the Setup mode
2) Move the “Up-Down” button to the option of language (ABC) and enter the submenu.
Insert SD card
Install SD memory card into the camcorder to provide more images stored, messages or storage
for other files.
1) Open the SD card cover. (Fig.1)
2) Insert SD memory card(golden finger up). (Fig.2)
3) Properly close the SD card cover. (Fig.3)
E
n
g
lis
h
1
Install the batteries
As this camcorder uses rechargeable batteries, please make sure to use attached batteries or
similar batteries as recommended by the manufacturer or distributor.
Note: Please set in batteries properly as per instructions described herein. Improper set-in of
batteries may incur damages to the camcorder or even fire.
1) Insert batteries into the battery slot (Fig.4)
2) Push batteries upward to the battery pack (Fig.5).
