Energy Mouse 2 GM-130024/T
English
- 4 -
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, according to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try correct the interference by one or more of the following measures:
1. Reorient the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into and outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction
manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and
also to prevent interference to the nearby radio and television reception. It is essential that
only the supplied power cord be used. Use only shielded cables to connect I/O devices to
this equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
SAR compliance has been evaluated in the product(s), and con be used in host
product(s) with substantially similar physical dimensions, construction, and electrical and
RF characteristics. End-users must be provided with specific information required to satisfy
RF exposure compliance for all final host devices. Compliance of this device in all final host
configurations is the responsibility of the Grantee.
The separation distance -20 cm must be clearly stated in the operating and/or
installation manual that is supplied to the User. This application is being made on behalf of
the Grantee.
