Energy Mouse 2 GM-130024/T
English
- 3 -
Warning: (Troubleshooting)
1.
Make sure the Energy Mouse 2 is completely charged before first usage.
2.
Use the standard cable or it could cause damage to Energy Mouse 2.
3.
Confirm the voltage of the mobile device is 5V before you use Energy Mouse 2 to charge
it.
4.
To maintain the life span and quality of Energy Mouse 2 battery, we recommend you
unplug the power cable promptly after Energy Mouse 2 is fully charged and when not in
use fully charge it every four months.
5.
Do not drop, knock, disassemble or attempt to repair Energy Mouse 2 by yourself or you
will void the warranty. If there is any problem, you can contact a service center for
assistance.
6.
Do not leave Energy Mouse 2 in a vehicle, expose it to sunlight or put it near any heat
source for a long time as strong light and high temperature will lead to battery damage.
7.
Store Energy Mouse 2 in a cool, dry place, and keep it away from fire and moisture.
8.
Do not put any object (except the USB cable) into any of the Energy Mouse 2 micro USB
input or USB output ports to avoid short circuit damage.
9.
Keep Energy Mouse 2 away from children and pets. Do not use the wireless optical/laser
mouse on a desk which is made of glass or mirror.
10.
The connection of the wireless device is
factory preset
, so when you plug the USB
receiver into any USB port, the connection between the micro receiver and the mouse
will
be established automatically
.
11.
In case your PC did not install the hardware successfully, remove the micro receiver from
the USB port and go
Human Interface Devices
under
Device Manager
to remove the
mouse, then plug in the micro receiver to a USB port again.
