ENGLISH
After the installation has completed, reboot the computer.
5.
5.
5.
5. Hardware Installation
Hardware Installation
Hardware Installation
Hardware Installationssss
5.1.
Put the batteries into the back of the wireless
tablet:
5.1.1.
Put two batteries on each side of the battery
slot.
5.1.2.
Put the third battery into the middle.
.
★
★
★
★ D
D
D
Do not mix or use different types of batteries at
o not mix or use different types of batteries at
o not mix or use different types of batteries at
o not mix or use different types of batteries at
the same time
the same time
the same time
the same time suc
suc
suc
such as
h as
h as
h as LI
LI
LI
LI----Ion, Alkaline, etc
Ion, Alkaline, etc
Ion, Alkaline, etc
Ion, Alkaline, etc; and
; and
; and
; and
rrrremember do not put the batteries in the wrong
emember do not put the batteries in the wrong
emember do not put the batteries in the wrong
emember do not put the batteries in the wrong
direction
direction
direction
direction....
5.2.
Connect the dongle to your USB port (as shown).
5.3.
Turn on the wireless tablet.
5.4. After you connect a pen tablet into the PC, you will
see a small tablet icon ( ) appear in the system
tray, which is normally at the lower right corner of
the screen.
★
★
★
★
Install your driver first, then connect your dongle
to the USB port. This will avoid any driver
installation error or delay while the system is
detecting new hardware
6666.... Verifying Hardware and Driver Functions
Verifying Hardware and Driver Functions
Verifying Hardware and Driver Functions
Verifying Hardware and Driver Functions
Follow these steps to verify if the wireless tablet is installed properly: