10
G
uide
S
ervice
ColorPage-Vivid 1200XE USB
How to Replace the Gear Wheel
figure2.6.1.
figure 2.6.2.
Step 1
To remove the Gear Wheel, take out the E Ring (refer to
figure 2.6.1.) with a tweezers.
When installing, please install the Gear Wheel, and then
using the Nipper to put the E Ring back.
Notice: When taking out the E Ring, please be careful not
to let it gone.
How to replace the Scan board
figure 2.7.1.
Step 1
Before gentle pull up the scan board from the slot on
the button case, disconnect the cable of FFC, motor cable.
figure 2.7.2.
Step 2
Before install the Scan board back , the FCC cable
should pass under through the EMI core and white PAD and
connect to the Scan board, then connect the motor cable.
Notice: To change the FFC cable , please refer to
“How to Replace the FFC Cable “
FFC Cable
EMI Core
Motor Wire
Summary of Contents for ColorPage-Vivid 1200XE USB
Page 1: ...ColorPage Vivid 1200XE USB...
