Genio PRO S, User Manual, Page: 29 / 36

29
B. Connecting your Genio PRO S to external MIDI Equipment
1) In order to send MIDI data to a General MIDI synthesizer or computer, connect a MIDI cable
between the MIDI Out port of the Genio PRO S and the MIDI In port of your synthesizer or
computer. See the diagram below.
2) In order to receive MIDI data from a General MIDI keyboard, synthesizer or computer, connect a
MIDI cable between the MIDI Out port of the external device and MIDI In port of the Genio PRO S .
See the diagram below.
Note : 1. Most computer do not have a MIDI interface built-in. You may need to add a MIDI interface
to your computer before you can connect it to your Genio PRO S .
2. You can connect MIDI In and Out cables at the same time. If connecting to a computer, be
sure to turn Patch through off in your software to avoid double notes
Control Unit
Computer
MIDI Output
Control Unit
MIDI Output
Keyboard/Sound Moduler
MIDI In
MIDI In
Computer
Control Unit
MIDI Output
MIDI Output
MIDI In
Keyboard/Sound Moduler