Genie Z-40, Operator'S Manual

Page: 52 / 63

Operator's Manual First Edition • First Printing
Operating Instructions
50 Z-62/40 Part No. 1257653
Installation of Padding
1 Install the 2 pieces of padding on the platform
rails. Position the padding to protect the panels
from contact with the platform rails.
Installation of Strap
1 Open the clamp and install it around a vertical
platform rail tube.
2 Insert a bolt with a washer through one side of
the clamp.
3 Install the strap assembly end plate onto the
bolt.
4 Insert the bolt through the other side of the
clamp.
5 Secure with a washer and a nut. Do not
over-tighten. The strap assembly end plate
should be able to slide on the platform rail.
Panel Cradle Operation
1 Secure both panel cradles to the platform.
2 Place the load so that it rests in both panel
cradles.
3 Center the load on the platform.
4 Secure the load to the platform using the strap.
Tighten the strap.
rubber
bumper 1
decal
hook piece
panel
cradle
base
U-bolt
mounting
slots
rubber
bumper 2
padding
clamp
hook