Genie Z-40, Operator'S Manual

Page: 44 / 63

Operator's Manual First Edition • First Printing
Operating Instructions
42 Z-62/40 Part No. 1257653
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all machine functions and turn the
engine off.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Emergency Power
Use emergency power if the primary power source
(engine) fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when using the
controls from the platform.
4 Break the security tie and lift the emergency
power switch cover.
Note: If the security tie is broken or missing,
consult the appropriate Genie Service Manual.
5 Simultaneously hold the
emergency power switch on and
activate the desired function.
The drive function will not operate with emergency
power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
3 Gasoline/LPG models: Choose fuel by moving
the fuel select switch to the desired position.
4 Start the engine.
To Position Platform
1 Press and hold a function enable
button.
2 Move the appropriate toggle switch according
to the markings on the control panel.
Drive and steer functions are not available from the
ground controls.