Genie X-135/70, Operator'S Manual

Page: 32 / 71

Operator's Manual First Edition • Seventh Printing
Controls
30 ZX-135/70 Part No. 160567
22 Thumb rocker for jib boom extend/retract
function
Push the top of the rocker
switch and the jib boom will
retract. Push the bottom of the
rocker switch and the jib boom
will extend.
23 Dual axis proportional control handle for jib
boom up/down and platform rotate left/right
functions
Move the control handle
up and the jib boom will
raise. Move the control
handle down and the jib
boom will lower. Move
the control handle to the
left and the platform will
rotate to the left. Move
the control handle to the
right and the platform will
rotate to the right.
24 Axle extend/retract switch with indicator lights
Move the axle select
switch to choose an axle
setting. The indicator
light will flash while the
axles are extending and
stay on when the axles
are fully extended. The
indicator light will flash
while the axles are
retracting and stay on
when the axles are fully
retracted.
25 Drive enable switch with indicator light
Light on indicates that the primary boom has
moved past either circle-end wheel and the
drive function is turned off. To drive, move the
drive enable switch and slowly move the drive
control handle off center.
26 Thumb rocker switch for primary boom
extend/retract function
Push the top of the rocker
switch and primary boom
will retract. Push the
bottom of the rocker switch
and the primary boom will
extend.
27 Dual axis proportional control handle for
primary boom up/down and turntable rotate
left/right functions
Move the control handle up
and the primary boom will
raise. Move the control
handle down and the
primary boom will lower.
Move the control handle to
the left and the turntable
will rotate to the left. Move
the control handle to the
right and the turntable will
rotate to the right.
28 Platform level switch
Move the platform level
switch up and the level of the
platform will raise. Move the
platform level switch down
and the level of the platform
will lower.