Part No. 133554
Genie TZ-34/20
39
Operator’s Manual
Fourth Edition • Fourth Printing
Lifting Instructions
Fully lower and retract the boom. Make sure the
boom rests in the cradle on the chassis.
Securely latch the boom hold-down latches.
Raise all four outriggers to the stowed position.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are four lifting points
on the chassis.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
X Axis
Y Axis
ANSI & CSA
23.1 cm
23.9 cm
CE
13.2 cm
22.9 cm
Observe and Obey:
Only qualifi ed riggers should rig and lift the
machine.
Only certifi ed crane operators should lift the
machine and only in accordance with the
applicable crane regulations.
Be sure the crane capacity, loading surfaces
and straps or lines are suffi cient to withstand
the machine weight. See the serial plate for the
machine weight.
Y axis
X axis
Chassis
Lifting
Points (2)
Chassis
Lifting
Points (2)
Transport and Lifting Instructions
