36
Genie TZ-34/20
Part No. 133554
Operator’s Manual
Fourth Edition • Fourth Printing
Storage
1 Make sure the boom is properly stowed and
the hold-down latches are secured.
2 Raise and stow the outriggers.
3 Select a safe parking location—fi rm level
surface, clear of obstructions and traffi c.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
6 DC models: Charge the batteries.
Moving Machine Without a Tow
Vehicle
Do not attempt to manually move a machine
unless it is on a fi rm, level surface. Use the parking
brake to control the speed of the machine while
pushing it.
Moving Machine Without a Tow
Vehicle
Do not attempt to manually move a machine
unless it is on a fi rm, level surface. Use the parking
brake to control the speed of the machine while
pushing it.
Platform Overload
Indicator Light (if
equipped)
Light fl ashing indicates the platform is overloaded
and no functions will operate.
Remove weight from the platform until the light
goes off.
Fall Protection
Personal fall protection equipment (PFPE) is
required when operating this machine.
Occupants must wear a safety belt or harness
in accordance with governmental regulations.
Attachthe lanyard to the anchor provided in the
platform.
All PFPE must comply with applicable
governmental regulations, and must be
inspected and used in accordance with the PFPE
manufacturer’s instructions.
After Each Use
1 Rotate the turntable so that the platform is
opposite the tongue of the machine.
2 Lower the boom into the mast cradles on the
chassis and the tongue.
3 Secure the hold-down latches.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 DC models: Charge the batteries.
Operating Instructions
