background image

Operator's Manual

Second Edition • Second Printing

Part No. 114255

Genie TMZ-50/30

5

SAFETY RULES

Explosion and Fire Hazards

Do not start the engine if you smell or detect liquid
petroleum gas (LPG), gasoline, diesel fuel or other
explosive substances.

Do not refuel the machine with the engine running.

Refuel the machine and charge the battery only in
an open, well-ventilated area away from sparks,
flames and lighted tobacco.

Do not operate the machine in hazardous
locations or locations where potentially flammable
or explosive gases or particles may be present.

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Conduct a thorough pre-operation inspection of
the machine and test all functions before each
work shift. Immediately tag and remove from
service a damaged or malfunctioning machine.

Be sure all maintenance has been performed as
specified in this manual and the appropriate
service manual.

Be sure all decals are legible and in place.

Be sure the operator’s, safety and responsibilities
manuals are complete, legible and in the storage
container located on the platform.

Towing Hazards

Read, understand and obey all of your tow vehicle
manufacturer’s recommendations, warnings and
instructions before towing this machine.

Do not tow the machine unless the mast is
lowered to the horizontal position and the mast
hold-down latch is securely locked in place.

Do not overload your tow vehicle. Check the
manufacturer's Gross Vehicle Weight Rating
(GVWR). To obtain the gross vehicle weight, add
the tongue weight of the trailer to the vehicle
weight (including vehicle, passengers and cargo).

Do not load cargo on the machine. The TMZ is not
designed to carry any extra cargo.

Be sure the hitch is securely attached to the tow
vehicle.

Be sure the safety chains (if required) are securely
attached to the tow vehicle.

Be sure that all driving lights are operational.

Be sure all hitch components, lights and mirrors
and methods of attaching the trailer to the tow
vehicle conform to local, state and federal
regulations.

Do not tow the machine on public roads unless it
meets all governmental regulations for towing.

Do not exceed 60 mph / 97 km/h. Obey all local
and national towing speed laws.

Be sure to chock the wheels of the trailer when
parking on a hill.

800-610-4101

ActionRental.com

Summary of Contents for TMZ-50/30








































Reviews: