Operator's Manual
Second Edition • First Printing
Specifications
64 S-80X
Part No. 1267884
Specifications
Model
S-80X
Height, working maximum
86 ft
26.2 m
Height, platform maximum
80 ft
24.4 m
Height, stowed maximum
9 ft 2 in
2.8 m
Horizontal reach, maximum
71 ft 6 in
21.8 m
Width, foam filled tires
8 ft 2 in
2.5 m
Length, stowed
36 ft 6 in
11.1 m
Maximum platform capacity,
unrestricted range of motion
500 lbs
227 kg
Maximum load capacity,
restricted range of motion
1000 lbs
454 kg
Maximum wind speed
28 mph
12.5 m/s
Wheelbase
9 ft 4 in
2.8 m
Turning radius (outside)
21 ft 6 in
6.6 m
Turning radius (inside)
12 ft
3.7 m
Turntable tailswing
4 ft 8 in
1.4 m
Turntable rotation (degrees)
continuous
Controls
12V DC proportional
Platform dimensions, 6 foot
(length x width)
72 x 30 in
182 x 76 cm
Platform dimensions, 8 foot
(length x width)
96 x 36 in
244 x 91 cm
Platform leveling
self-leveling
Platform rotation
160°
AC outlet in platform
standard
Hydraulic pressure, maximum
(boom functions)
2900 psi
200 bar
System voltage
12V
Tire size
18-625, 16 ply FF
Ground clearance
13 in
33 cm
Fuel tank capacity, diesel
35 gallons
132 liters
Fuel tank capacity, gasoline
30 gallons
113.6 liters
Weight
35,500 lbs
16,103 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Maximum slope rating, stowed position, 2WD
Platform uphill
30%
(17°)
Platform downhill
15%
(9°)
Side slope
25%
(14°)
Maximum slope rating, stowed position, 4WD
Platform uphill
45%
(24°)
Platform downhill
30%
(17°)
Side slope
25%
(14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Drive speed, stowed
3.3 mph
40 ft/8.2 sec
5.4 km/h
12.2 m/8.2 sec
Drive speed, raised or
extended
0.68 mph
40 ft/40 sec
1.1 km/h
12.2 m/40 sec
Floor loading information
Tire load maximum
15,901 lbs
7210 kg
Tire contact pressure
100 psi
7.03 kg / cm
2
690 kPa
Occupied floor pressure
340 psf
1600 kg / m
2
16.3 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
