Second Edition • First Printing
Operator's Manual
General
Safety
Part No. 1261735
S-60X 7
WARNING
Runaway Hazard
Machine movement can occur
when a machine is operated
on a slope that exceeds rated
uphill, downhill or side slope
rating.
A runaway machine could result
in death or serious injury.
2WD: 30% (17°)
4WD: 45% (24°)
TRAX: 45% (24°)
2WD: 10% (6°)
4WD: 30% (17°)
TRAX: 30% (17°)
1262342 A
Do not drive machine on a slope that exceeds
maximum uphill, downhill or side slope rating.
Determine slope and side slope ratings for
machine and determine slope grade.
Maximum slope rating,
platform downhill
(gradeability):
Maximum slope rating,
platform uphill
Note: Slope rating is subject to ground conditions
and adequate traction. Gradeability applies to
platform downhill configuration only.
Be sure boom is below horizontal
and platform is between non-steer
wheels or tracks.
Move drive speed select switch to
machine on incline symbol.
Driving On a Slope
Maximum
side slope rating
25% (14°)
28236
Read and understand Operator's
Manual, Responsibilities Manual and
Safety Manual and all safety signs
before using or maintaining machine.
If you do not understand the
information in the manuals, consult
your supervisor, the owner or the
manufacturer.
28236 D
WARNING
Improper operation or
maintenance can result in
serious injury or death.
DANGER
82862
Tip-over Hazard
Welder power supply
reduces rated platform
capacity and
must be factored into total
platform load.
DANGER
Do not overload
platform.
Welder power supply
weighs 75 lbs / 34 kg.
97579
114390
DANGER
218559
218559 A
Keep away from overhead obstructions
or other possible hazards.
Crush Hazard
Contact with overhead obstructions
could result in death or serious injury.
WARNING
Drive Direction Hazard
Machine can move in opposite direction of
joystick movement. Movement in an unplanned
direction can result in death or serious injury.
Always match the color-coded direction arrows
on platform controls and drive chassis to
determine direction of machine travel. Read
and understand operator's manual.
WARNING
Only raise the platform when the
machine is on a frm, level surface.
Tip-over Hazard
Tipping over this machine will
result in death or serious injury.
DANGER
1261737
1261737
1262342
114416
114416
Tip-over Hazard
If tilt-alarm
sounds, unit is
on a severe
slope. Death or
serious injury
will result.
114416 A
DANGER
Platform uphill:
1 Lower boom.
2 Retract boom.
Platform downhill:
1 Retract boom.
2 Lower boom.
• Read operator’s
manual before
attempting to move
machine.
• Stop all movement.
1262342
Summary of Contents for S-60X
Page 69: ......
