Genie LCM16-IP, User Manual

Page: 4 / 32

customer needs.
l Permission
When the card is issued, the permission of the card is authorized. After the user enters in the
elevator and swipes the card on the card reader, the access control system determines whether the
card is valid and has the permission to reach the floor, and automatically select the corresponding
floor, and the elevator will go up to the designated floor.
l Designated floor
The card user is authorized to reach the designated floor. After the user enters in the elevator
and swipes the card on the card reader, the access control system determines whether the card is
valid, and the elevator can go to the designated floor without pressing the elevator floor button.
Otherwise, button is invalid and the elevator is restricted.
l Temporary visitor function
Temporary cards can be issued for visitors. You can set the effective time, the floor, the
elevator, and the in-out times .When the temporary visitor leaves, you can cancel the card and
cancel the permission of this temporary card.
l Mutual access function
The households swipe the card normally, the system is opened to the self-occupied floor (by
default). If the household needs to visit other friends in the same building, press the “Re-visit”
button after entering the elevator. At this time, the system enters the “mutual access mode”
working state,
l Intercom
When the visitor calls the household, after the household confirmed, the intercom system
opens the door, the elevator will be called. On the first floor, a set of floor signals is provided to
the main control board. The buttons on the floor are valid. After the vistor enter the elevator, the
corresponding floor button can be pressed to drive the elevator to the destination floor.
1.3 System components
l Sphinx
l Elevator Controller
l Elevator Expand Controller Board
l FLP8104
l FSC8105
l Reader
l Other accessories, such as printers.