Genie LCM16-IP, User Manual

Page: 19 / 32

Chapter 4 FLP8104
4.1 Overview
The FPU8104 floor collector combines the new building intercom technology to
develop a smart elevator management system that collects user floor signals and
elevator operating status through high-speed optocouplers, enabling visitor functions
and control and management of temporary use of temporary elevators.
The system allows the visitor to reach the tenant floor without the use of a card or
remember password without the need for a resident permit, and cannot enter other floors.
Residents still use the IC card elevator in the form of internal personnel level control:
swiping the card or entering a password. When the guest visits, the intercom system is
used to call the resident. The resident agrees that the unit door can be opened by the
intercom extension, and the elevator floor collector can also send the signal that the
guest can go to the floor. When the elevator goes down to the bottom, the guest enters the elevator.
After that, according to the authorization of the owner, press the button of the floor where the
resident lives, and then register to start the elevator, while other unauthorized floors, the visitor
cannot log in.
4.2 Features
l Floor signal collection
l Elevator control status collection
l Each board can be used for 10 floors of elevators. Each additional expansion board can
add 10 floors. With the above control panel, it can efficiently manage and control 128-
story elevators.
l Connect 16 floor collectors
l 1 set of relay contact output
l 4 sets of extended signal input
4.3 Parameters
l CPU: 8-bit microcontroller CPU
l
Power supply: 9-12VDC
l Communication: RS485
l Inspection method: CRC
l Working temperature: -20 ° C to 70 ° C
l
Relative humidity: 5% to 95%