Procedure:
Table:
003
GTH-4013 SX
GTH-4017 SX
14 GTH-4013 SX GTH-4017 SX
Document 57.4403.4200
Section 7 - Repair Procedures
May 2008
TABLE
003
Removing the engine from the machine
WARNING
Once all operations have been performed make sure
that all the electrical wires and the hydraulic lines are
disconnected from the motor.
18
Remove the four screws (two on the front
and two at the back) of the vibration-damping
brackets with a 22 mm wrench
19
Sling the engine using a two-leg chain with hook
to be coupled to the two top lugs.
20
Raise the engine with caution and ensure no
parts are still connected
21
Remove the engine from the machine, rest it on
a wooden pallet and hold it in position with some
plugs
Reassembling the engine:
CAUTION
To reassemble the engine, repeat the steps above
in reversed order considering the precautions
below.
Handle the engine with extreme caution to
prevent it from crashing against the machine
19
18