16
Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246
Part No. 46281
Operator's Manual
First Edition • Seventeenth Printing
Function Tests
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to
use.
Know and understand the function tests
before going on to the next section.
4 Inspect the workplace.
5 Only use the machine as it was intended.
Fundamentals
The function tests are designed to discover any
malfunctions before the machine is put into service.
The operator must follow the step-by-step
instructions to test all machine functions.
A malfunctioning machine must never be used. If
malfunctions are discovered, the machine must be
tagged and removed from service. Repairs to the
machine may only be made by a qualified service
technician, according to the manufacturer's
specifications.
After repairs are completed, the operator must
perform a pre-operation inspection and function
tests again before putting the machine into service.
The symbols shown below appear in the text in
this operator’s manual as an aid to identifying
operating instructions.
Use the symbols on this page and page 11 to
identify which controller you have on your machine,
and use the symbols in the text to identify which
action to complete on your controller.
If no symbol is listed for your controller, then no
action is needed.
Two function select buttons and
Emergency Stop button in upper left
corner
One function select button and
Emergency Stop button in upper left
corner
Controller with Emergency Stop button in
lower right corner
