Genie GS-2032 Operator'S Manual Download Page 6 | Manualshive

Page: 6 / 39

background image

4

Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246

Part No. 46281

Operator's Manual

First Edition • Seventeenth Printing

GS-2046
ANSI & CSA - 2 person

180 lbs / 801 N

CE - Indoor use only - 2 person

180 lbs / 801 N

CE - Outdoor use - 2 person

90 lbs / 400 N

GS-2646
ANSI & CSA - 2 person

150 lbs / 667 N

CE - Indoor use only - 2 person

150 lbs / 667 N

CE - Outdoor use - 2 person

90 lbs / 400 N

Australia - Indoor use only - 2 person

120 lbs / 534 N

Australia - Outdoor use - 1 person

45 lbs / 200 N

GS-3246
ANSI & CSA - 2 person

105 lbs / 467 N

CE & Australia -
Indoor use only - 2 person

105 lbs / 467 N

CE & Australia - Outdoor use - 1 person 45 lbs / 200 N

Do not alter or disable machine components that in
any way affect safety and stability.

Do not place or attach fixed or overhanging loads to
any part of this machine.

Do not place ladders or scaffolds in the platform or
against any part of this machine.

Do not modify or alter an aerial work platform.
Mounting attachments for holding tools or other
materials onto the platform, toeboards or guard rail
system can increase the weight in the platform and
the surface area of the platform or the load.

Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed to
the wind will decrease machine stability.

Do not drive the machine on or near uneven terrain,
unstable surfaces or other hazardous conditions
with the platform raised.

Use extreme care and slow speeds while driving
the machine in a stowed position across uneven
terrain, debris, unstable or slippery surfaces and
near holes and drop-offs.

Do not push off or pull
toward any object outside
of the platform.

Maximum allowable
manual force

GS-2032
ANSI & CSA - 2 person

120 lbs / 534 N

CE - Indoor use only - 2 person

120 lbs / 534 N

CE - Outdoor use - 1 person

45 lbs / 200 N

GS-2632
ANSI & CSA - 2 person

100 lbs / 445 N

CE - Indoor use only - 2 person

100 lbs / 445 N

Australia - Indoor use only - 2 person

90 lbs / 400 N

SAFETY RULES

«
...
4
5
6
7
8
...
»

Summary of Contents for GS-2032








































Reviews:

No comments

Related manuals for GS-2032

Brand: BendPak Pages: 29

Brand: AJ Pages: 79

Brand: Oshkosh Corporation Pages: 110

Brand: Molnar Pages: 22

Brand: LGMG Pages: 79

Brand: GMG Pages: 31

Brand: GMG Pages: 34

Brand: GMG Pages: 37

Brand: GMG Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands