Genie GR-26J, Operator'S Manual

Page: 46 / 59

Operator's Manual
Fourth Edition • First Printing
Operating Instructions
44 GR-26J Part No. 1307950GT
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
To Position Platform
1 Push and hold the appropriate function button.
2 Press and hold the appropriate function enable
button.
Drive and steer functions are not available from
the ground controls.
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out the red Emergency Stop button at the
ground controls and twist to release the red
Emergency Stop at the platform controls.
To Position Platform
1 Press a function select button. The indicator
light next to the selected function will be on.
If the control handle is not moved within 5 seconds
of selecting a function, the function will not
operate. Select the function again.
2 Press and hold the function enable switch on
the control handle.
3 Move the control handle in the direction
indicated by the markings on the control panel.
To Steer
1 Press the drive function select button. The
indicator light next to the drive function will be
on.
If the control handle is not moved within 5 seconds
of selecting a function, the function will not
operate. Select the function again.
2 Press and hold the function enable switch on
the control handle.
3 Press the thumb rocker switch on the top of
the control handle.
Use the color-coded direction triangles on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
To Drive
1 Press the drive function select button. The
indicator light next to the drive function will be
on.
If the control handle is not moved within 5 seconds
of selecting a function, the function will not
operate. Select the function again.
2 Press and hold the function enable switch on
the control handle.
3 Increase speed: Slowly move the control
handle off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction triangles on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
Machine travel speed is restricted when the mast
or jib boom is raised.